French press
- Starting grind
- Coarse to medium-coarse
- How it works
- Grounds steep in water; a metal mesh separates them.
- In the cup
- Full-bodied, with some sediment.
- First brew
- 15 g coffee + 240 ml water; start with a 4-minute steep.
Monthly bag Home brewing reference
Start with the brewer you already own. French press usually suits a coarser grind, pour-over a medium to medium-fine grind, and moka pots a finer grind that is still coarser than espresso. South Indian filters need their own adjustment: the holes, chamber size and coffee bed affect how the decoction drips.
These are starting points to taste and adjust, not guaranteed settings for every coffee. Follow your equipment’s instructions, especially its capacity and pressure-safety guidance.
Use your usual drink as the guide: a full mug, a short black coffee, or a concentrated base for milk. The cards below pair each method with its grind and a first recipe.
Grind is the size of the coffee particles, not the roast level. Finer grinding exposes more surface area and usually slows water passing through a coffee bed; coarser grinding usually lets it flow faster.
These labels are relative. “Filter grind” might mean a paper pour-over or a South Indian metal filter, so name the brewer rather than asking for “filter” alone. Grinder numbers do not transfer between brands, and texture comparisons such as salt or sand are only rough cues.
If you buy ground coffee, tell the seller your brewer model and, for espresso, whether the basket is single-wall or pressurised. The terms here describe brewing needs, not a Ghatside purchase menu.
A French press is a useful choice for a full-bodied mug without paper filters. Its metal mesh lets oils and some fine particles into the cup.
Adjust: If the cup is thin, try a slightly finer grind while keeping the dose and time the same. If there is too much grit or the plunger resists, try coarser grounds, press gently and leave the last sediment behind. A finer-grind settling method can also work; coarse is a starting point, not a rule.
Paper pour-over suits a cleaner mug with less sediment. Cone shape, filter paper, batch size and pouring technique all change the flow.
Adjust: If drainage is very slow, try a little coarser and avoid excessive stirring. If it runs through quickly and tastes thin or sharply sour, try a little finer. Larger batches and thicker papers often need coarser settings. Compare with the Hario V60 recipe, then judge the taste rather than chasing its time.
A moka pot makes concentrated stovetop coffee with less pressure than a pump espresso machine. Its “cups” are small servings, not full mugs.
Adjust: For a harsh cup, reduce heat first, then try a slightly coarser grind on the next brew. Do not force more coffee into the basket or keep heating a pot that fails to flow. Check the cooled pot’s filter, gasket and valve against its manual. Bialetti explains why moka coffee should not be pressed.
Make a smaller serving with a smaller pot rather than arbitrarily underfilling the basket, unless the manufacturer provides a reducer or instructions for doing so. Dilute the finished coffee with hot water or milk if you prefer a longer drink.
Espresso is sensitive to grind, dose and how evenly the bed is prepared. A single-wall basket usually needs an espresso-capable grinder; a pressurised or dual-wall basket is designed differently and may suit pre-ground coffee.
Adjust: With dose and beverage weight held steady, a shot that rushes through may need finer grinding; one that barely drips may need coarser grinding. Spraying or uneven flow can mean channels in the bed, so check distribution as well. Taste before changing the recipe. Breville’s espresso recipe also starts near a 1:2 yield and recommends adjusting for the beans.
Use the machine’s directions for pressurised baskets rather than copying a single-wall recipe. Moka and espresso grinds are not interchangeable simply because both make strong coffee.
A South Indian filter makes decoction through a perforated metal chamber. Start around medium-fine to fine, but avoid assuming an espresso-fine powder will work: hole size, bed depth and the pressing disc affect drainage.
Adjust: If it barely drips, clean the holes, avoid compressing the bed and try a slightly coarser grind. If the decoction drains quickly and tastes weak, try slightly finer grounds or a deeper bed within the filter’s capacity. Keep water and dose steady when testing a grind change.
Pure coffee and coffee–chicory blends can drain and taste differently, so check the pack rather than assuming a blend. This example is for coffee; it makes no claim about the composition of Ghatside’s monthly bag. Skiá’s filter brew guide gives another small-batch decoction recipe to compare with your equipment.
Strength is how concentrated a drink tastes. Extraction is how much flavour the water takes from the coffee. More coffee can make a cup stronger without solving uneven extraction.
Record the coffee dose, water or beverage weight, grind setting, time and what you tasted. For pre-ground coffee, adjust dose, pouring or steep time instead, and describe the result when asking for a different grind.
For French press and pour-over, ratios refer to coffee and water added. A 1:16 recipe uses 15 g coffee for 240 ml water; the cup will contain less because grounds retain water. For kitchen recipe calculations, 1 ml of water is approximately 1 g. Espresso uses beverage yield; moka and South Indian filters need their own recipes.
Calculate coffee and water for your French press or pour-over →
Ghatside’s monthly coffee offer explains the coffee and ordering details. For help with a grind, email ghatside@brainer.one with your brewer model and usual drink.